How to Program Your Remote: a blog about programming your remote.
If they gave an award for the most over-the-top product name, it would be hard to beat the TRENDnet 8-Port Gigabit GREENnet Switch, model TEG-S82g. GREENnet is an acronym for Green Ethernet: a series of techniques which reduce the power consumption of switches by turning off ports that aren’t in use. Trendnet’s website says that using GREENnet can reduce power consumption by up to 70%.
This sounds like a great idea. So I bought one, and set out to measure how much power it actually saved me.
I measured the power used by an older Trendnet switch and four computers with identical power supplies (Antec EarthWatts 380W). I’ll call these “baseline” measurements; this gives me a baseline value for how much energy my current setup consumes. Then I replaced the old switch with the new one and repeated the tests.
How to Program Your Remote: a blog about programming your remote.
I have a universal remote that controls my TV, VCR, and DVD player. I’d like to program it so that I can control my receiver, but that’s not an option – the receiver is too new.
If you’re in the market for a universal remote, you don’t have to check out all the different models yourself. You can read reviews from user-review sites like epinions.com and cnet.com, or from professional reviewers like this one at ecoustics.com.
“How to Program Your Remote” is a blog about programming your remote. Programming your remote is only slightly harder than programming your VCR. If you can program your VCR, you can program your remote.
The blog How to Program Your Remote is a free resource for the frustrated masses who have attempted to program their remotes and been stymied by recondite acronyms, mysterious symbols, and indecipherable instructions. Get help programming your remote control now!
Gadget Zone is a blog about programming your remote. It has detailed instructions for how to program your remote for everything from your TV to your garage door. The blog is written by an expert in the home automation field, and all articles are reviewed by an expert who works in the home automation business.
The blog is written in a professional tone, and the articles are quite detailed. But the site is not limited to just articles – it also has discussion forums where you can ask questions and get feedback from other users of the site. The site was started by a home automation enthusiast named Jason, who wanted to share his knowledge with others.
The blog is updated frequently, so you will always be able to find something new here. If you are interested in learning more about how to program your remote, or if you would like some tips on how to improve your existing programming skills, this blog is an excellent resource for you.
What is this blog about?
Ever since I got my first remote control, I have always had an interest in programming it. Some remotes are really easy to program, and some are almost impossible. This blog will help you with both types.
If you have a remote that has a lot of buttons and isn’t too old, then learning how to program it is usually straightforward. The hardest part is usually finding the instructions.
But what if you don’t have the instructions? If your remote was made in the last ten years or so, then you can often find a resource online that will tell you how to program it, even without the instructions. But what do you do if your remote was made more than 10 years ago? And what if it has a lot of buttons and no obvious way to program it?
What you need is some software that will let you learn the codes that your remote uses to communicate with your electronics. There are a few programs out there that can help with this (both free and commercial), but they aren’t very good.
The purpose of this blog is to be a resource for people who would like to program their own remote control and get the most out of it.
If you are looking for a universal remote control, there are many options that can work well in your home or office.
I will go over some of the basic features on a typical universal remote, but there are many different manufacturers, so your particular remote may have slightly different options available.
It is important to note that these remotes are not designed to replace a factory original remote completely. They are designed to control all of the functions of one particular device (TV, DVD player, etc.).
A lot of people have this problem. A lot of people use a TV guide or even the old-school printed newspaper to figure out what they want to watch.
I think this is broken. I think television should be like a radio that you can search through.
For example, here’s what I want:
* I want to be able to search for “comedy” and find all comedies on tonight, no matter what channel they’re on.
* If I see something interesting in the search results I want to be able to record it easily, no matter which channel it’s on. And if the comedy is a rerun I want to be able to record new episodes only, and not reruns.
* I don’t want to have to worry about programming my DVR ahead of time; if something comes up at the last minute that looks interesting, it should be easy for me to say “record that.” It should also be easy for me not just to record one episode of something but any episode that matches some criteria–for example, any episode of The Simpsons or any episode of The Last Word with Lawrence O’Donnell or any episode of Ken Burn’s Civil War documentary.
* Even though there are hundreds of things on every night