In this blog I will be sharing with you the steps to take in order to fix a phone that has been dropped in water. People don’t know what to do when they drop their phones in water and it breaks. Follow these steps below and your phone will be up and running again!
In the first step, take your phone out of the water as soon as possible. But, do not turn it on or charge it because it could cause further damage
The next step is to remove the phone’s case and battery as fast as possible. If you have an iPhone or Samsung that is non-removable then just remove the case
Lastly, put your phone in a bowl of rice or in a bag of uncooked rice overnight so that it can absorb all the water inside of your phone. This should work for any phone!
If you dropped your phone in the water, don’t panic. It is possible to save it! The first and most important thing to do is to turn your phone off as soon as possible after it has been dropped into water. Then take out the battery and SIM card from the phone. Never try to charge your phone or turn it on after it has fallen into water. This can cause irreparable damage, so be sure to remove the battery immediately.
If your phone has a detachable cover, remove this as well. Try to get rid of any liquid that may be in the headphone jack or charging port by tilting and shaking the phone, then use a hairdryer set at low heat to blow air through these openings. Remember not to direct the hot air directly at the surface of your phone, however; simply blow it through the ports so that it evaporates any moisture inside them.
If you have a bag of silica gel or uncooked rice handy, put your cell phone in a container of one of these materials and seal it up for at least 24 hours, or until all signs of moisture have disappeared from your device. Silica gels absorb moisture from their surroundings effectively, and uncooked rice works in a similar way by sucking up excess
You dropped your phone in the toilet, or maybe in a puddle on the street. Or maybe you just spilled a glass of water on it. Whatever the case, you need to act fast if you want to get that phone working again.
If your phone has been submerged in liquid, do not attempt to turn it on and do not plug it in to charge it. If you do, you will very likely end up causing permanent damage and voiding any warranty that may still be valid. Instead, remove any external parts (battery cover, SIM card, microSD card) and wipe everything down with a soft cloth. Then place the phone in an airtight bag or container full of rice and let it sit for at least 24 hours. The rice will help absorb any moisture remaining inside the phone. After 24 hours, try turning it on; if that works, use caution while charging and make sure it is completely dry before attempting to attach any external parts like the battery cover or SIM card tray.
If this doesn’t work, there are plenty of professional repair services that specialize in water damage. A quick web search should tell you if there’s one available in your area; if not, many will offer to take your phone via mail-in service and return
I’m going to tell you how to fix your phone if you drop it in water.
First, put your phone in a bag of rice.
Next, go on YouTube and search “how to fix a wet phone”.
Lastly, get a new phone.
In order to fix your phone, you will need a new battery. The first step is to find the battery. You can find the battery by going online to order one.
Once you have found the battery, it is time to order one. You can do this by going online and purchasing one.
Once you receive the new battery, it is time to replace the old one with the new one. This can be done by removing the back of the phone and replacing it with the new battery.
After replacing the battery, it is time to put everything back together and turn on your phone to see if it works. If it does not work, then you may need to take it into a phone store or call customer service for help.
The iPhone is a device that has a lot of functionality. It can be used on a daily basis to check email, as a phone, and as a text message device.
The first thing to do if you get your iPhone wet is to turn it off as quickly as possible. Once you have done this, you should remove the sim card and leave it out for at least 24 hours.
Once you have removed the sim card, you should place the phone in an area where it is going to get good airflow. You want to make sure that the phone dries out completely before turning it back on.
Once the phone has dried completely, there are some steps that you can take to ensure that it is working properly. The best thing to do is to make sure that you turn the phone on and let it work for a few minutes. If everything looks like its working fine then you are good to go.
If your screen looks strange after letting the phone dry out, then there are some things that you need to do immediately in order to ensure its functionality. First off, try charging your phone in order to see if it will hold a charge or not. If it does not hold a charge at all, then there is probably something wrong with your charging port
“Today we’re announcing the availability of Google Cast SDK preview, a new technology that enables developers to build consistent, intuitive multi-screen experiences across mobile devices and TVs. Many different apps and devices will soon be compatible with Google Cast — so no matter what content you’re looking for, you’ll easily be able to find it from your favorite device and cast it to your TV.
With the Google Cast app for Android and iOS, you can use your phone or tablet as a remote control for the TV. You can also quickly search for content to cast from apps like YouTube. And when you’re not casting, the app surfaces content recommendations so you can easily discover new things to watch.
Developers will be able to build their own multi-screen experiences using the Google Cast SDK. With this SDK, developers can quickly make their apps compatible with any device running Google Cast-enabled software—including TVs that run Chromecast, tablets, phones and laptops. The SDK provides features such as:
Automatic device discovery
Playback status updates
A simple API that works across Android and iOS
The SDK is now available in developer preview at googlecast.com/developers.”